Procedures, part numbers and tightening torques.
INFO: Applicable only to petrol engines.
- Remove bottom engine cover – socket No. 10;
- unscrew engine oil filter and drain plug;
- screw in engine drain plug with new aluminium washer, then tighten to 35 Nm;
- hand tighten new engine oil filter to first resistance, then make half to 3/4 of a turn (do not use any wrenches);
- start the engine for 15 seconds, check level and fill-up engine oil (engine oil pressure light should go after 1-3 seconds. If not, probably there is a need to replace oil sump and pan o-rings);
- check for engine oil leaks, install engine cover.
Required products
- Engine oil filter Volvo P/N 3517857 (MANN-FILTER W 917 lub BOSCH 0 451 103 219),
- aluminum washer Volvo P/N 977751.
Engine oil level between MIN and MAX mark
- Red dipstick: 1 liter,
- Fluorescent dipstick: 1,5 liter.